You know what you’re going to make?
A video billboard.
And you know what I’m not going to let it go to waste.
It’s my goal to get you to put up this awesome billboard in your backyard.
I’ve done a bit of research into this sort of thing, and I’ve learned that there are a lot of great ideas out there.
You’ll see that I’m putting together a list of these, and you’ll be able to put it up in your yard within a couple of weeks.
You can make your own version of the billboard and make it even better with these instructions.
So, go ahead and create your own.
How to Create an Animated Billboard in Your Yard: Step 1: Measure the length of your piece of PVC pipe.
Measure the height of the PVC pipe to the desired length.
Take the PVC and mark the end of it off to get the width.
Take your PVC pipe, and cut the end off so you have a length.
Step 2: Measure your length.
Now measure your width to get your desired length, mark that off as well.
Step 3: Measure off the ends of the pipe so you can easily put it together.
Step 4: Drill a hole for your pipe.
This one is a bit tricky.
I’ve got a drill bit that works great for this, but you could use anything that you want.
Here’s the drill bit I used.
Step 5: Take your pipe, mark it off as you would for your billboard, and drill a small hole for it.
Step 6: Put the pipe together.
Now you can place it on top of the other billboard you want to make, and place the other sign in the middle of the top.
Step 7: Make the other side of the sign, and put the other top part on top.
Step 8: Place the top portion of the first billboard on top and the bottom portion of your second billboard on the bottom.
Step 9: Add the other end of the third billboard onto the top of your first one.
I think you’ll see how easy this is to do.
Once you have your two billboard types, make a note of the type of sign you want, and what the size of the space you want is.
Now, let’s get to the fun part: Step 10: Now that you have the three pieces of PVC you need, you can put them together.
You can use any PVC pipe you want if you want; I recommend making your own pipe and sticking the pieces to each other, but if you’re not sure, then you can use PVC pipe that you bought from the hardware store.
I recommend PVC pipe with a 1/2-inch diameter pipe thread.
Step 11: Attach the pieces of pipe to each of your two billboards.
You could also attach the top and bottom pieces of the two signs to each billboard separately, but I found it easier to just attach the first piece of the second sign to the top part of the bottom part of my billboard.
Step 12: Attached your two signs, you’re done!
Step 13: Now you just need to place your second one on top to show off the whole thing.
This is the third part of this tutorial.
There are a couple more steps to this process.
First, you need to figure out how long you want your billboard to be.
Second, you’ll need to make sure the space in front of your billboard will have enough space for it to float.
Step 14: Now, you have to place the top half of your sign on top, and the side that is facing away from you.
Take your PVC and drill two holes for the PVC.
Now that you know how long the space between your two sign pieces should be, you will need to take the PVC to a shop for your glue.
Place the PVC in the hole you drilled, and start attaching the two pieces of your PVC.
Add glue to the PVC until it starts to stick.
Don’t worry if you can’t get it to stick well.
It’ll be easy once you get used to the idea.
Finally, you want the PVC glue to stick to the outside of the signs.
With the PVC attached, put the sign in your driveway.
The sign will float and the PVC will stick to it.
Step 15: Next, you may want to take your PVC to the post office for your mailing address.
Put your PVC on the post, and take the pipe to your mailbox.
Step 16: Place your mailbox, and hang your new billboard.
You just made a simple and fun billboard in the backyard.
You may even want to put your second sign on it.
If you’re looking for more